Signed-off-by: myperworld <myperworld@126.com>
This commit is contained in:
myperworld committed
1 parent
0986832fd1
commit
aacd052c06
3403 files changed
+597376
-12
No files matched your search
@@ -0,0 +1,173 @@
|
||||
#include <Arduino.h>
|
||||
#include "mapdata.h"
|
||||
#include "espnow.h"
|
||||
#include "ws2812_FASTLED.h"
|
||||
#include "wemos_oled.h" //注意可能需要改屏幕的地址0x3C或0x3D等，若屏幕不亮可以试试用wire库中的示例程序扫描地址
|
||||
#include "esp_wifi.h" // 添加WiFi库以设置信道
|
||||
|
||||
// 函数声明
|
||||
// void coordinates_to_Leds();
|
||||
// void joy1_map_led();
|
||||
// void joy2_map_led();
|
||||
// void joy1_led_blink();
|
||||
// void joy2_led_blink();
|
||||
void zero_test();
|
||||
void eeprom_ini();
|
||||
void eeprom_broadcastAddress();
|
||||
|
||||
unsigned long previousMillis1 = 0;
|
||||
unsigned long previousMillis2 = 0;
|
||||
unsigned long previousMillis3 = 0;
|
||||
const long LEDdelay=40; //(milliseconds)LED变化时间间隔
|
||||
int fade = 1; //呼吸效果
|
||||
|
||||
|
||||
//摇杆坐标转化为离原点距离
|
||||
int J1_dis = 0;
|
||||
int J2_dis = 0;
|
||||
//摇杆坐标转化为0-360的角度
|
||||
int J1_angle = 0;
|
||||
int J2_angle = 0;
|
||||
|
||||
//摇杆角度转化为左右摇杆LED序号
|
||||
int J1_led_num = 0;
|
||||
int J2_led_num = 0;
|
||||
//摇杆离原点距离转化为左右摇杆LED亮度
|
||||
int J1_led_bright = 0;
|
||||
int J2_led_bright = 0;
|
||||
|
||||
//**********************Setup*************************
|
||||
void setup() {
|
||||
pinmode_pullup();
|
||||
FastLED_ini(); //FastLED初始化
|
||||
Serial.begin(115200);
|
||||
delay(100);
|
||||
eeprom_ini(); //EEPROM初始化
|
||||
Serial.print(" LX_zero: ");Serial.print(EEPROM.read(1));
|
||||
Serial.print(" LY_zero: ");Serial.print(EEPROM.read(2));
|
||||
Serial.print(" RX_zero: ");Serial.print(EEPROM.read(3));
|
||||
Serial.print(" RY_zero: ");Serial.println(EEPROM.read(4));
|
||||
|
||||
// 初始化 ESP-NOW
|
||||
Serial.println("Initializing ESP-NOW...");
|
||||
delay(100);
|
||||
WiFi.mode(WIFI_STA);
|
||||
|
||||
// 设置WiFi信道为6
|
||||
esp_wifi_set_channel(6, WIFI_SECOND_CHAN_NONE);
|
||||
Serial.println("Set WiFi channel to 6");
|
||||
|
||||
Serial.println("InitESPNow");
|
||||
// This is the mac address of the Master in Station Mode
|
||||
Serial.print("STA MAC: "); Serial.println(WiFi.macAddress());
|
||||
// Init ESPNow with a fallback logic
|
||||
InitESPNow();
|
||||
|
||||
// 设置发送数据回调函数
|
||||
// Once ESPNow is successfully Init, we will register for Send CB to
|
||||
// get the status of Trasnmitted packet
|
||||
esp_now_register_send_cb(OnDataSent);
|
||||
|
||||
// 设置接收数据回调函数
|
||||
// Once ESPNow is successfully Init, we will register for recv CB to
|
||||
// get recv packer info.
|
||||
// esp_now_register_recv_cb(OnDataRecv);
|
||||
|
||||
//配对连接pair with another ESP-NOW device
|
||||
// pair_device();
|
||||
|
||||
BroadcastMode();//启动时默认为广播模式
|
||||
|
||||
// // In the loop we scan for slave
|
||||
// ScanForSlave();
|
||||
// // If Slave is found, it would be populate in `slave` variable
|
||||
// // We will check if `slave` is defined and then we proceed further
|
||||
//
|
||||
// `slave` is defined
|
||||
// Add slave as peer if it has not been added already
|
||||
manageSlave();
|
||||
// pair success or already paired
|
||||
|
||||
resetData();
|
||||
// Serial.print("Data Size: "); Serial.print(sizeof(data));Serial.println(" Bytes");
|
||||
// Serial.print(" LX: ");Serial.print(data.j1PotX);
|
||||
// Serial.print(" LY: ");Serial.print(data.j1PotY);
|
||||
// Serial.print(" RX: ");Serial.print(data.j2PotX);
|
||||
// Serial.print(" RY: ");Serial.print(data.j2PotY);
|
||||
// Serial.print(" // R1: ");Serial.print(data.buttonR1);
|
||||
// Serial.print(" R2: ");Serial.print(data.buttonR2);
|
||||
// Serial.print(" J1: ");Serial.print(data.j1Button);
|
||||
// Serial.print(" J2: ");Serial.print(data.j2Button);
|
||||
// Serial.print(" LB: ");Serial.print(data.buttonLB);
|
||||
// Serial.print(" RB: ");Serial.print(data.buttonRB);
|
||||
// Serial.print(" T1: ");Serial.println(data.tSwitch1);
|
||||
|
||||
run_OLED_on_Core_0();//在CORE0上运行OLED相关程序避免延迟影响
|
||||
|
||||
}
|
||||
|
||||
void loop() {
|
||||
|
||||
read_joydata();
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
LX_to_send = map_normal(LX_read, 0, LX_zero, 255, LX_inverted);
|
||||
LY_to_send = map_normal(LY_read, 0, LY_zero, 255, LY_inverted);
|
||||
RX_to_send = map_normal(RX_read, 0, RX_zero, 255, RX_inverted);
|
||||
RY_to_send = map_normal(RY_read, 0, RY_zero, 255, RY_inverted);
|
||||
|
||||
/*********************************************************************************************/
|
||||
|
||||
LX_to_send = constrain(LX_to_send,0,255);
|
||||
LY_to_send = constrain(LY_to_send,0,255);
|
||||
RX_to_send = constrain(RX_to_send,0,255);
|
||||
RY_to_send = constrain(RY_to_send,0,255);
|
||||
|
||||
data.j1PotX = LX_to_send;
|
||||
data.j1PotY = LY_to_send;
|
||||
data.j2PotX = RX_to_send;
|
||||
data.j2PotY = RY_to_send;
|
||||
data.buttonR1 = digitalRead(R1);
|
||||
data.buttonR2 = digitalRead(R2);
|
||||
data.j1Button = digitalRead(LS);
|
||||
data.j2Button = digitalRead(RS);
|
||||
data.buttonLB = digitalRead(LB);
|
||||
data.buttonRB = digitalRead(RB);
|
||||
data.tSwitch1 = digitalRead(BK);
|
||||
|
||||
//*****************************************************
|
||||
unsigned long currentMillis = millis();
|
||||
if (currentMillis - previousMillis1 >= LEDdelay) {
|
||||
previousMillis1 = currentMillis;
|
||||
|
||||
runLED();
|
||||
|
||||
if (J1_dis<10 && J2_dis<10){
|
||||
if (voltage > 3.50){ //电池电压高于3.5V时星闪模式
|
||||
// joy1_led_blink();
|
||||
// joy2_led_blink();
|
||||
} else { //否则省电关灯
|
||||
fill_solid (leds1,NUM_LEDS,CRGB::Black); //关灯
|
||||
fill_solid (leds2,NUM_LEDS,CRGB::Black); //关灯
|
||||
FastLED.show();
|
||||
}
|
||||
} else {
|
||||
// joy1_map_led();
|
||||
// joy2_map_led();
|
||||
}
|
||||
|
||||
}
|
||||
|
||||
if (currentMillis - previousMillis2 >= 100) {//每100ms发送一次
|
||||
previousMillis2 = currentMillis;
|
||||
// ESP-NOW发送数据
|
||||
sendData();
|
||||
}
|
||||
|
||||
if (currentMillis - previousMillis3 >= 5000) {//每5秒更新一次电量
|
||||
previousMillis3 = currentMillis;
|
||||
batteryLevel(); //读电池电量
|
||||
}
|
||||
|
||||
}
|
||||
Reference in new issue
Block a user